Nyan-Hwa Tai  Ph.D.
Deputy Dean, Academic Affairs
Professor, Department of Materials Science and Engineering
Email: nhtai@mx.nthu.edu.tw
Tel: +886-3-5742568
Fax: +886-3-5737406

 

Education

  • Ph.D. in Mechanical Engineering University of delaware, USA (1986-1990)
  • M.S. in Mechanical Engineering Chung-Yuan University, Taiwan, ROC (1981-1983)
  • B.S. in Industrial Engineering Chung-Yuan University, Taiwan, ROC (1974-1978)
Experience
  • Deputy Dean, Academic Affairs (2007 Feb.- )
  • Director, Division of International and Continuing Education (2007 Aug.-)
  • Chairman, Department of Materials Science and Engineering (2003-2006)
  • Vice-chairman, Department of Materials Science and Engineering (2000-2003) 

Research Interests

  • Synthesis Carbon nanotubes, Field emission Light, Nanocomposites, Solar Cell, Ultra-nanocrystalline Diamond, Biocompatibility of carbon nanotube.

Courses Offered

  • Mechanics of Materials, Transport Phenomena, Mechanics: Statics, Introduction to Composite Materials, Composite Materials, Fabrication and Characterization of Composites Materials, Carbon Materials and Applications

 

Publications 

A. Invited Papers:

1.

N. H. Tai, W.C. Chang, C.C.M. Ma and Y.P. Tsai, "Processing and Modeling of Chemical Vapor Infiltration for Fabricating High Temperature Composites", Taiwan-Austria Joint Conference, Kaohsiung College, Jan. 13-14, (1995). (Invited Presentation)

2.

N. H. Tai, M. C. Yip, C. L. Lin, "Fatigue behavior of Gr/Epoxy composites subjected low energy impact loading”, 1st Cross Strait Conference for Composite Materials, Taiwan, May, (1996). (Invited Presentation)

3.

N. H. Tai, H.S. Kuo, J.H. Chern and C.P. Ju, “Processing and Tribological Behavior of Pulsed Chemical Vapor Infiltrated Carbon/Carbon Composites”, Taiwan-Austria Joint Conference, Cheng-Kung Univ., March 27, (1999). (Invited Presentation)

4.

T. F. Chen, N. H. Tai, “Fabrication of Carbon/SiC nanocomposites Fabricated through Slurry Infiltration and Pulse Chemical Vapor Infiltration”,  1st Cross Strait Ceramic and Metal Matrix Composite Conference, Shanghai, China, July (2000). (Invited Presentation)

5.

N.H. Tai,C. Y. Lee, C. M. Chen, F.T Wang, “Effects of carbon nanopowder on the electrode performance of lithium ion battery”, 1st Cross Strait Conference for Carbon Materials, Beijing, China,Oct. 13 (2000). (Invited Presentation)

6.

Nyan-Hwa Tai and Che-Fu Chen, “Nanofiber Growth in the Fabrication of Ceramic Matrix Nanocomposites Through Pulsed Chemical Vapor Infiltration (PCVI), 12nd Cross Strait Ceramic and Metal Matrix Composite Conference,Tai-chung, Taiwan, Nov., (2001). (Invited Presentation)

7.

Hsiang-ming Hseuh1, Nyan-Hwa Tai1, Tong-ping Perng1, San-Der Chyou2, “Fabrication and Characterization of Nanocomposites Reinforced by Carbon Nanotubes – (1)Synthesis of Carbon Nanotubes”, 3rd Cross Strait Ceramic and Metal Matrix Composite Conference, Wuhan, China (2003). (Invited Presentation)

8.

Tsung-Yen Tsai, Nyan-Hwa Tai, and I-Nan Lin,” Carbon Nanotube for Field Emission Cathode Prepared by the Screen Printing Method” 3rd Cross Strait Conference for Carbon Materials, Tai-chung, Taiwan,Oct. 16 (2004). (Invited Presentation)

9.

Nyan-Hwa Tai “Synthesis and applications of Carbon Nanotubes in Composites and Field emission Lamp” Carbon Fiber Conference,SAMPE-Taiwan Chapter,Dec. 4 (2004) (Invited Presentation). (Invited Presentation)

10.

Nyan-Hwa Tai1,a, Meng-Kao Yeh2,b, Jia-Hau Liu2,c, Chien-Hsin Yang1,d “Fabrication and characterization of nanocomposites reinforced by carbon nanotubes - (2) Testing of mechanical properties” 4th Cross Strait Ceramic and Metal Matrix Composite Conference, Tainan, Taiwan (2005). (Invited Presentation)

11.

Nyan-Hwa Tai, “Synthesis of Carbon Nanotubes and its Applications in Composites, Field Emission Lighting, and Electromagnetic Interference Shielding”, 2006 Cross Strait Nanotechnology Conference,Tatung Univ,,April 24-25, (2006). (Invited Presentation)

12.

Nyan-Hwa Tai, Meng-Kao Yeh, Shih-Hao Tseng, Chien-Chao Chiu, Tsung-Yen Tsai, Jia-Hau Liu, and Tai-Hao Peng, “Synthesis of Carbon Nanotubes and its Applications in Composites and field Emission Light”, Inter. Conf. Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, Vancouver, Canada July 4-8, (2006). (Invited Presentation)

13.

Nyan-Hwa Tai, “Synthesis of carbon nanotubes fluff and cable and investigation its applications in field emission light and composites”, UK-Taiwan Nanosicence and Nanotechnology Symposium, London, Oct. 6-7, (2006). (Invited Presentation)

14.

Nyan-Hwa Tai, “Technology and Applications of Carbon Nanotubes”, Workshop on Nano- fabrication: Fundamentals and Applications, October 20, 2006, National Taiwan University. July 4-8, (2006). (Invited Presentation)

15.

Nyan-Hwa Tai, “Mechanical Properties of Nanocomposites Reinforced by Single-walled Carbon Nanotubes”, 5th Cross Strait Conference for Composite Materials, Oct. 22~27, Shanghai, China (2006). (Invited Presentation)

16.

戴念華,”Synthesis and Applications of Carbon Nanotubes”,兩岸清華大學奈米科技研討會,北京,Oct. 27-28 (2008)

17.

粱家榮,曾士豪,蔡宗岩,戴念華,葉孟考,”Synthesis of carbon nanotubes and its applications in composites and field emission light”, 第七屆兩岸碳材料研討會,太原,山西,July 23-25 (2008)

B. Refereed Papers:

1.

N.H. Tai and T.W. Chou, "Analytical Modeling of Chemical Vapor Infiltration (CVI) in Fabrication of Ceramic Composites", Journal of the American Ceramic Society, Vol. 72, No. 3, pp. 414-420 (1989). (SCI Journal)

2.

N.H. Tai and T.W. Chou, "Modeling of the Improved CVI Processing for Ceramic Composites Fabrication", Journal of the American Ceramic Society, Vol. 73, No. 6, pp. 1489-1498 (1990). (SCI Journal)

3.

N.H. Tai and T.W. Chou, "On the Deposition Mechanism of Al2O3 in the CVI Process for Forming Ceramic Composites", Journal of Material Research Society, Vol. 5, No. 10, pp. 2255-2256 (1990). (SCI Journal)

4.

C.C.M. Ma, C.L. Lee and N.H. Tai, "Chemical Resistance of Carbon Fiber-Reinforced Polyether Ether Ketone and Polyphenylene Sulfide Composites", Polymer Composites, Vol. 13, No. 6, p.435 (1992).(SCI Journal)

5.

C.C.M. Ma, C.L. Lee, M.J. Chang and N.H. Tai, "Effect of Physical Aging on the Toughness of Carbon Fiber-Reinforced Polyether  Ether Ketone and Polyphenylene Sulfide Composites (I)", Polymer Composites, Vol. 13, No. 6, p.441 (1992). (SCI Journal)

6.

C.C.M. Ma, C.L. Lee, M.J. Chang and N.H. Tai, "Hygrothermal Behavior of Carbon Fiber-Reinforced Polyether Ether Ketone (PEEK) and Polyphenylene Sulfide (PPS) Composites.I", Polymer Composites, Vol. 13, No. 6, p.448 (1992). (SCI Journal)

7.

C.C.M. Ma, N.H Tai, S.H. Wu, S.S. Lin, J.F. Wu, C.L. Ong, I.C. Wu and M.F. Sheu, "The Hygrothermal Effect on the Fatigue Behavior of Carbon Fiber/PEEK Laminate Composites (I)", Journal of Polymer Research, Vol. 1, No. 1, pp.17-24 (1994). (SCI Journal)

8.

N.H. Tai, T.W. Chou and C.C.M. Ma, "Effects of Deposition Mechanisms in the Modeling of Forced-Flow/Temperature-Gradient Chemical Vapor Infiltration", Journal of the American Ceramic Society, Vol. 77, No. 3, pp.849-51 (1994). (SCI Journal)

9.

C.C.M. Ma, N.H. Tai and W.C. Chang, "Effects of Processing Methods and Parameters on the Mechanical Properties and Microstructure of Carbon/Carbon Composites", Journal of Materials Science, Vol. 29, pp.5859-5867 (1994). (SCI Journal)(文章之圖被取用為當期封面)

10.

W.C. Chang, N.H. Tai and C.C.M. Ma, "Dynamic Mechanical Properties of Carbon-Carbon Composites",  Journal of Materials Science, Vol. 30, pp.1225-1232 (1995). (SCI Journal)

11.

C.C.M. Ma, N.H. Tai, S.H. Wu, S.S. Lin and J.F. Wu, "Fatigue Behavior of Quasi-isotropic Carbon Fiber/PEEK Laminated Under Tension-Tension Loading", Journal of Polymer Composites, Vol. 16, No. 3, pp.216-223 (1995). (SCI Journal)

12.

N.H. Tai, C.C.M. Ma and S.H. Wu, "Fatigue Behavior of Carbon Fiber/PEEK Laminate Composites", Composites, Vol. 26, pp.551-559 (1995). (SCI Journal)

13.

S.H. Lin, C.C.M. Ma, N.H. Tai, S.H. Wu, J.F. Wu and J.M. Lin, "Effect of Frequency on the Fatigue Behavior of 〔±45〕4S Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites Under Tension-Tension Loading", Journal of Polymer Research Vol.2, No.3, pp.171-178 (1995). (SCI Journal)

14.

C.C.M. Ma, S.H. Lin and N.H. Tai, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading", Book title "Advanced New Materials and Engineering New Technologies", edited by P.N. Prasad, J.E. Mark, and J.F. Tung, Plenum Press Co., New York, pp.53-68 (1995).

15.

C.C. M. Ma, N.H. Tai, W.C. Chang and C.K. Fang, "Carbon/Carbon Composites with Surface Treated Carbon Fibers", Polymer Materials., Encycl. (1995)

16.

W.C. Chang, H.T. Chao, N.H. Tai and C.C.M. Ma, "Microstructure and Oxidation Resistance of SiC Coated Carbon/Carbon Composites via Pressureless Reaction Sintering",  J. of Materials Science, Vol. 31, pp.649-654 (1996). (SCI Journal)

17.

C.C.M. Ma, N.H. Tai, W.C. Chang and Y.P. Tsai, "Morphologies, Microstructure and Mechanical Properties Change of Carbon/Carbon Composites During the CVI Densification Process", Carbon, Vol. 34, No. 10, pp.1175-1179 (1996). (SCI Journal)

18.

S.H. Lin, C.C.M. Ma and N.H. Tai, "Long Fiber Reinforced Polyamide and Polycarbonate Composites(II)Fatigue Behavior and Morphological Property", Journal of Vinyl & Additive Technology, Vol. 2, No.1, pp.81-86 (1996). (EI Journal)

19.

S.H. Lin, C.C.M. Ma and N.H. Tai, “Mechanical Properties and Morphology of Different Carbon Fiber Lengths in Reinforced Polyetheretherketone (PEEK) Composites”, Journal of Advanced Materials, pp.56-62 (1997). (SCI Journal)

20.

C.C.M. Ma, N.H. Tai, S. H. Wu, S. H. Lin and J. M. Lin, “Creep Behavior of Carbon-fiber-reinforced Polyetheretherketone (PEEK) [±45]4S Laminated Composites (I)”, Composites Part B, Vol. 28B, pp.407-417 (1997). (SCI Journal)

21.

N.H. Tai, C.Y. Lee and S.K. Chen, “Morphological Investigations of Pultruded Carbon Fiber Bundles Used as Electrodes for Aquafuel Generation”, Carbon, Vol.35, No.10-11, pp.1674-1675 (1997). (SCI Journal)

22.

N.H. Tai, M.C. Yip and J.L. Lin, “Effects of Low Energy Impact on Fatigue Behavior of the Carbon/Epoxy Composites”, Composites Science and Technology, Vol. 58, pp.1-8 (1998). (SCI Journal)

23.

H. Hocheng, Y. H. Guu and N.H. Tai, “The Feasibility Analysis of Electrical-Discharge Machining of Carbon-Carbon Materials”, International Journal of Materials and Manufacturing Process, Vol. 13, pp.117-132 (1998). (EI Journal)

24.

H. K. Liu, N.H. Tai and W. H. Chen, “Influence of Processing Parameters on Mechanical Properties of Composite Cylinders Fabricated by the Filament Winding Method’, Journal of Chinese Society of Mechanical Engineering, Vol. 19, No. 2, pp.187-197 (1998)

25.

N.H. Tai and H.C. Yu, “Effects of Low-energy Impact and Thermal Cycling Loadings on Fatigue Behavior of the Quasi-isotropic Carbon/Epoxy Composites”, Journal of Polymer Research, Vol. 5, No. 3, pp.143-151 (1998). (SCI Journal)

26.

Nyan-Hwa Tai, H. K. Liu, Z. C. Chen, “Effects of impact on compressive strength of the Concrete Columns Reinforced by Filament WoundComposites”, Reinforced Plastics/Composites, Vol. 75, June, 1998, pp. 20-40. (Invited, in Chinese)

27.

N.H. Tai, C.C.M. Ma, J. M. Lin and G.Y. Wu, “Effects of Thickness on Impact and Fatigue Behaviors of the Quasi-Isotropic Gr/Epoxy Composites Before and After Low Energy Impacts”, Composite Science and Technology (in press, 1999). (SCI Journal)

28.

J.M. Lin, C.C.M. Ma, N.H. Tai, W. J. Wu and C. Y. Chen, “Preparation and Properties of SiC Modified Carbon/Carbon Composites by Carbothermal Reduction Reaction”, Journal of Materials Science Letters, Vol. 18, pp.1353-1355, (1999). (SCI Journal)(文章之圖被取用為當期封面)

29.

H.K. Liu, N.H. Tai and S.Y. Lin, “Compressive Strength of Hybrid Composite Tubes After Low Energy Impact”, J. of Composites Tech. & Research, Vol. 21, No.2, pp.65-74 (1999). (SCI Journal)

30.

N. H. Tai, M. C. Yip, and C. T Lin, “Fatigue Properties of the Carbon/PEEK Laminates Subjected Thermal Cycling”, Bulletin of SAMPE-Taiwan Chapter, Nov. 1999, (invited, in Chinese)

31.

H. K. Liu, N.H. Tai and Z.C. Chen, “Technology and Development of the Concrete Reinforced by Filament Wound Composites”, Bulletin of The Chinese Materials Society, Dec. 1999, (invited, in Chinese).

32.

N.H. Tai, M.C. Yip and C.M. Tseng, “Influences of Thermal Cycling and Low-energy Impact on the Fatigue Behavior Gr/PEEK Laminates”, Composites-Part B, Vol. 30, pp. 849-865(1999). (SCI Journal)

33.

J.M. Lin, C.C.M Ma, and N.H. Tai, “Carbon Fiber Reinforced Phenolic Resin/Silica Ceramer Composites- Processing, Mechanical and Thermal Properties”, Polymer Composites, 21, (2) 305-311 (2000). (SCI Journal)

34.

N.H. Tai, H.K. Liu and Z.C. Chen, “Compression after Impact (CAI) Strength of Concrete Columns Reinforced by Filament Wound Non-adhesive Composite”, Vol. 21, No.2, Polymer Composites, p.268-280 (2000). (SCI Journal)

35.

H. Hocheng, N.H. Tai and C.S. Liu, “Assessment of Ultrasonic Drilling of C/SiC Composite Materials”, Composite: Part A 31, pp.133-142 (2000). (SCI Journal)

36.

H.K. Liu, N.H. Tai and Z.C. Chen, “Compression Strength of Concrete Columns Reinforced by non-adhesive Filament Wound hybrid Composites”, Composite-Part A. Vol. 31, No.3, pp. 221-233, (2000) (SCI Journal)

37.

H.K. Liu, N.H. Tai and Z.C. Chen, “Compressive Strength of Composite/concrete Cylinders after Low Energy Impact ”, Journal of Reinforced Plastics and Composites, Vol.20, No. 10, P.849 (2001) (SCI Journal)

38.

Y.H. Guu, H. Hocheng, N. H. Tai, S. Y. Liu, “Effect of electrical discharge machining on the characteristics of carbon fiber reinforced carbon composites”, Journal of Materials Science, Vol. 36, p. 2037 (2001) (SCI Journal)

39.

Nyan-Hwa Tai and Che-Fu Chen, “Nanofiber Formation in the Fabrication of Carbon/Silicon Carbide Ceramic Matrix Nanocomposites by Slurry Impregnation and Pulse Chemical Vapor Infiltration”, Journal of The American Ceramic Society, Vol. 84, [8], p.1683 (2001) (SCI Journal). 本文中之設備示意圖被 國科會工程中心 ”工程科技通訊” 採用為第六十五期封面

40.

Chien-Kang Kao, Wee-Yih Lin, Hsun Chang, Chuen-Horng Tsai, Nyan-Hwa Tai, Cheng-Chung Chi, and I-Nan Lin, Optical properties of PECVD TEOS-SiO2 films, Ferroelectries 264 (1-4): 1949-1954 2001 (SCI Journal)

41.

H.K. Liu, N.H. Tai and Z.C. Chen, “Effects of SeaWater on the Compressive Strength of Concrete Cylinders Reinfoced by non-adhesive Wound Hybrid Polymer Composites ”, Composites Science and Technology, Vol. 62, (2002), p.2131. (SCI Journal)

42.

Nyan-Hwa Tai, Yu-Long Lee, Cheng-Hsiung Lin, Hsiu-Fung Cheng, I-Nan Lin, “Ferroelectric Properties of Pb(Zr1-xTix)O3 Graded Thin Films”, Ferroelectries, Vol. 271, p.1825-1830 (2002) (SCI Journal)

43.

N.H. Tai, H.H. Kuo, J.H. Chern Lin, C.P. Ju, “Mechanical and Tribological Properties of 2-D Medium Thick Carbon/Carbon Composites Densified Through Pulsed Chemical Vapor Infiltration”, Journal of Materials Science, Vol. 37, p.3693, (2002) (SCI Journal)

44.

K. C. Hsieh, N. H. Tai , Y. M. Shen, Tong-Hsu and I. N. Lin, “Thick Pb(Ni1/3Nb2/3)O-3-(Pb1-x)(Ti1-yZry)O-3 films prepared by tape-casting”, INTEGR FERROELECTR 46: 3-15 (2002) (SCI Journal)

45.

Hsiang-Ming Hsoeh, Nyan-Hwa Tai , Chi-Yuan Lee, J. M. Chen, F. T. Wang, “Electro- chemical Properties of the Multi Wall Carbon Nanotube Electrode for Secondary Lithium-ion Battery”, Review on Adv. Mater. Sci. 4, 50 (2003) (SCI Journal)

46.

I-Nan Lin, Kun-Che Hsieh, Kun-Yu Lee, Nyan-Hwa Tai, “ Preparation of Ferroelectric Pb(Zr1-xTix)O3/Si Film by Laser Lift-off Technique”, Journal of European Ceramic Sociaty, 24 (2004) 975-978  (SCI Journal)(NSC 91-2216-E-007-027)

47.

Tsung-Yen Tsai, Nyan-Hwa Tai, and I-Nan Lin, “Characterizations of Carbon nanotube Electron Field Emission Devices Prepares by LTCC Process”, Diamond and Related Materials 13 (2004) 982-986 (SCI Journal) (NSC-91-2120-E-007-004)

48.

Nyan-Hwa Tai, M.eng-Kao Yeh, Jia-Hau Liu, “Enhancement of the Mechanical Properties of Carbon Nanotube/phenolic Composites using a Carbon Nanotube Network as the Reinforcement”, Carbon, 42, pp. 2774-2777 (2004) (SCI Journal) (NSC92-2120-E-007-004)

49.

Nyan-Hwa Tai, Che-Fu Chen, C.Y. Lee, “Pulsed Chemical Vapor Infiltration: Carbon/SiC Nanocomposites”, Chapter in a Book ”Multiphased Ceramic Materials”, Editors: W.H. Tuan and J. K. Guo, Springer-Verlag Berlin Heidelberg (2004). (Chapter in a Book)

50.

Chou CH, Huang JH, Lin YC, Tai NH, Lin IN, “Low temperature synthesis of AlN films by ICP-assisted metalorganic chemical vapor deposition method”,  INTEGRATED FERROELECTRICS 68: 95-103 2004

51.

Yung-Chen Lin, Cheng-Hsien Chou, Nyan-Hwa Tai, Jin-Hua Huang, and I-Nan Lin, “Pb(Zr, Ti)O3 Thin Film Deposited Using ALN Buffer Layer and Its Ferroelectric Properties”, Integrated Ferroelectrics, 64:237-246, (2004) (SCI Journal)

52.

Weileun Fang, Huai-Yuan Chu, Wen-Kuang Hsu, Tung-Wen Cheng, Nyan-Hwa Tai, “Polymer reinforced aligned multi-walled carbon nanotube composites for MEMS applications”, Advanced Materials, 2005, 17, 2987–2992 (SCI Journal) (NSC-93-2218-E-007-012, NSC-93-2113-M-007-028).

53.

C.-L. Wang, Y.C. Liao, F. C. Hsu, N.H. Tai and M.K. Wu, “Preparation and Characterization of Thin Film Li4Ti5O12 Electrodes by Magnetron Sputtering”, Journal of The Electrochemical Society, 152 (4) A:653-657, (2005) (SCI Journal) (NSC 91-2112-M-007-056).

54.

K. Y. Li , N. H.Tai, U. N.Lin , “Preparation of PNN-PZT thick film on Pt/Ti/SiO2/Si substrate by laser lift-off process”, INTEGRATED FERROELECTRICS 69: 135-141 2005

55

Joseph PT, Y.C. Chen, Y. H. Chu, H. F. Cheng, N. H. Tai, I. N. Lin, “Microwave properties of BST and BST/BMT thin films grown on sapphire substrate by evanescent microwave probe”, INTEGRATED FERROELECTRICS 77: 45-50 2005

56.

Chi-Young Lee, Nyan-Hwa Tai, Shu-Hsu Hsieh, “Synthesis of Nano-Sized Polycrystalline PZT Powders using Molecular Building Blocks by Designed Chemical Route”, Journal of Nanoparticle Research, 8 (2), pp. 287-292 (2006) (SCI Journal)

57.

M. K. Yeh, N. H. Tai, Y. J. Lin, “Fabrication and mechanical properties of MWNTs/ phenolic nanocomposites”, Materials Science Forum, Vol. 505-507, pp. 121-126, 2006 (SCI Journal) (NSC93-2212-E-007-047)

58.

Chien-Chao Chiu, Chia-Yun Chen, Nyan-Hwa Tai and Chuen-Horng Tsai, “Growth of High-quality Single-walled Carbon Nanotubes Through the Thermal Chemical Vapor Deposition using Co-sputtering Fe -Mo Films as Catalysts”, SURFACE & COATINGS TECHNOLOGY 200 (10): 3199-3202 (SCI Journal)(NSC 93-2216-007-024) (2006)

59.

Cheng-Hsien Chou, Yung-Chen Lin, Jin-Hua Huang, Nyan-Hwa Tai, I-Nan Lin, “Growth of high quality Al thin film on diamond using TiN/Ti buffer layer, Diamond and Related Materials, 15 (2-3): 404-409 (SCI Journal) (2006)

60.

Yeh, M. K. Tai, N. H. and Liu, J. H., “Dynamic Mechanical Properties of MWNTs/Phenolic Nanocomposites,” Key Engineering Materials Journal. Vol. 306-308, pp. 1073-1078, 2006 (SCI Journal) (NSC93-2212-E-007-047)

61.

Meng-Kao Yeh, Nyan-Hwa Tai, Jia-Hau Liu, “Mechanical Behavior of Phenolic-based Composites Reinforced with Multi-walled Carbon Nanotubes”, Carbon 44 (2006) 1–9,  Available, Online. (SCI Journal) (NSC93-2212-E-007-047)

62.

Ying-Chieh Chen, Chia-Yun Chen, Nyan-Hwa Tai, Yen-Chih Lee, Su-Jien Lin, I-Nan Lin, “Characteristics of ultra-nano-crystalline diamond films grown on the porous anodic alumina template”, Diamond and Related Materials, 15 (2-3): 324-328 (2006) (SCI Journal) (NSC 93-2112-M-032-010)

63.

Der-Hsien Lien, Wen-Kuang Hsu, Hsiao-Wen Zan, Nyan-Hwa Tai, Chuen-Horng Tsai, “Photo-current amplifier at carbon nanotube-metal contacts”, Advanced Materials, 2006,18, 98-103, (SCI Journal) (NSC 93-2113-M-007-028)

64.

Chi-Young Lee, Nyan-Hwa Tai, Shu-Hsu Hsieh, “The formation of perovskite PbTiO3 powders by sol–gel process”, Materials Chemistry and Physics (2006), 97 (2-3): 468-471

65.

Chien-Chao Chiu1, Nyan-Hwa Tai, Meng-Kao Yeh, Bo-Yi Chen, Shih-Hao Tseng and Ying-Huang Chang “Tip-to-tip growth of aligned single-walled carbon nanotubes under an electric field”, J. of Crystal Growth. (SCI Journal) (NSC 92-2120-E-007-004) 290 (1): 171-175 (2006)

66.

Chien-Chao Chiu, Tsung-Yen Tsai, Nyan-Hwa Tai, Chi-Young Lee, “Synthesis of ultra long vertically aligned carbon nanotubes using the rapid heating and cooling system in the thermal chemical vapor deposition process”, SURFACE & COATINGS TECHNOLOGY 200 (10): 3215-3219 (2006)

67.

Nyan-Hwa Tai, Meng-Kao Yeh, Jia-Hau Liu, and C. H. Yong, “Fabrication and characterization of nanocomposites reinforced by carbon nanotubes (2) - Testing of mechanical properties”, KEY ENGINEERING MATERIALS 313: 1-6 2006

68.

C. H. Chou, Y. C. Lin, H. H. Huang, N. H. Tai, I. N. Lin, “Preparation of highly textured AlN films using Mo and Ti electrode for integrated AlN-based film bulk acoustic wave resonators, INTEGRATED FERROELECTRICS 80: 407-413 2006

69.

C.C. Chiu, T. Y. Tsai, and N. H. Tai, “Field emission properties of carbon nanotube arrays through the pattern transfer process”, NANOTECHNOLOGY 17 (12): 2840-2844 (2006)

70.

Meng-Kao Yeh, Bo-Yi Chen, Nyan-Hwa Tai, and Chien-Chao Chiu, “Force Measurement by AFM Cantilever with Different Coating Layers”, Key Engineering Materials Vols. 326-328, (2006) pp. 377-380

71.

Meng-Yen Tsai, Chung-Yi Yu, Chien-Hsin Yang, Nyan-Hwa Tai, and Tsong-Pyng Perng,
Chien-Ming Tu, Zishan Husain Khan, Yang-Chung Liao, and Cheng Chung Chi, “Electrical transport properties of individual disordered multiwalled carbon nanotubes”, APPLIED PHYSICS LETTERS 89, (2006), p.192115

72.

Debabrata Pradhan, Li-Ju Chen, Yen-Chih Lee, Chi-Young Lee, Nyan-Hwa Tai, I-Nan Lin, “Effect of titanium metal in the prenucleation of ultrananocrystalline diamond film growth at low substrate temperature”, Diamond & Related Materials 15 (2006), pp.1779–1783

73.

N.H. Tai, M.K. Yeh, C.H. Yang, S.H. Tseng, C.C. Chiu, T.-Y. Tsai, J.H. Liu, and T-H Peng, “Synthesis of Carbon Nanotubes and Its Applications in Composites and Field Emission”, Materials Science Forum, Vol. 539-543, (2007), pp. 3491-3496

74.

Meng-Kao Yeh, Nyan-Hwa Tai, and Yan-Jyun Lin, “Glass Transition Temperature of Phenolic-based Nanocomposites Reinforced by MWNTs and Carbon Fibers”, Key Engineering Materials, Vols. 334-335 (2007), pp. 713-716

75.

Bo-Yi Chen, Meng-Kao Yeh, and Nyan-Hwa Tai, “The Accuracy of the Spring Constant of Atomic Force Microscopy Cantilevers by Finite Element Method”, Analytical Chemistry, 79, 1333-1338 (2007)

76.

Li-Ju Chen, Nyan-Hwa Tai, Chi-Young Lee, I.-Nan Lin, “Effects of pretreatment processes on improving the formation of ultra-nano-crystalline diamond (UNCD)” Journal of Applied Physics, 101, 064308 (2007).

77.

Shih H. Tseng, Nyan H. Tai, Wen K. Hsu, Lih J. Chen, Jhy H. Wang, Chien C. Chiu, Cyi Y. Lee, Lih J Chou, Keh C. Leou, “Ignition of Carbon Nanotubes using a Photoflash”, Carbon, 45, 958-964 (2007)

78.

Wang, CH; Lin, HK; Ke, TY; Palathinkal, TJ; Tai, NH; Lin, IN; Lee, CY; Chiu, HT, Growth of polycrystalline tubular silicon carbide Yajima-type reaction at the vapor-solid interface CHEMISTRY OF MATERIALS, 19 (16): 3956-3962 AUG 7 2007

79.

Kuang-Chung Chen, Chia-Fu Chen, Jen-Hao Lee, Tai-Lin Wu, Chian-Liang Hwang, Nyan-Hwa Tai, Ming-Chun Hsiao, “Low-temperature CVD growth of carbon nanotubes for field emission application” Diamond and Related Materials 16 (3): 566-569 MAR 2007

80.

Hsin-Fu Kuo, Der-Hsien Lien, Wen-Kuang Hsu, Nyan-Hwa Tai, Shih-Chin Chang, “ Gas sensing improvement of carbon nanotubes by NH4OH-flash treatment: a nondestructive purification technique”, JOURNAL OF MATERIALS CHEMISTRY 17 (34): 3581-3584 2007, and also selected as hot article by British Royal Society of Chemistry

81.

Meng-Kao Yeh , Nyan-Hwa Tai , and Yan-Jyun Lin”, Mechanical Properties of Phenolic- based Nanocomposites Reinforced by Multi-walled Carbon Nanotubes and Carbon Fibers”, Composites: Part A 39 (2008) 677–684

82.

K. R. Wang, S. J. Lin1, L. W. Tu, M. Chen, Q. Y. Chen, T. H. Chen, M. L. Chen, H. W. Seo, N. H. Tai, S. C. Chang, I. Lo, D. P. Wang, W. K. Chu, “InN nanotips as excellent field emitters”, Applied Physics Letters, Vol. 92, p. 123105, Mar. 17, 2008

83.

Y. C. Chen, X. Y. Zhong, A. Konicek, D. S. Grierson, N. H. Tai, I. N. Lin, B. Kabius, J. M. Hiller, A.V. Sumant, R. W. Carpick, O. Auciello, “Synthesis and Characterization of Smooth Ultra-nanocrystalline Diamond Films via Low Pressure Bias-Enhanced Nucleation and Growth”, Applied Physics Letters, 92, No. 13, P.133113, 2008

84.

Chen LJ, Liu CC, Tai NH, Lee CY, Fang WL, Lin IN, “Effects of tungsten metal coatings on enhancing the characteristics of ultrananocrystalline diamond films”, Journal of Physical Chemistry C, pp. 3759-3765, Vol.112, No.10, Mar. 12, 2008

85.

P. T. Joseph, N. H. Tai, Chi-Young Lee, H. Niu, W. F. Pong, and I. N. Lin, “Field emission enhancement in nitrogen-ion-implanted ultrananocrystalline diamond films”, J. Applied Physics, Vol. 103, No. 4, (2008, Feb.)

86.

Meng-Kao Yeh, Tsung-Han Hsieh, Nyan-Hwa Tai, “Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites”, Materials Science and Engineering A, 483–484, pp.289-292 (2008)

87.

Yan-Lun Liou, Jyun-Cheng Liou, Jin-Hua Huang, Nyan Hwa Tai, I-Nan Lin, “Fabrication and field emission properties of ultra-nanocrystalline diamond lateral emitters”, Diamond & Related Materials 17 (2008) 776–781.

88.

P. T. Joseph, Nyan-Hwa Tai, Yi-Chun Chen, Hsiu-Fung Cheng, I-Nan Lin, “Transparent ultrananocrystalline diamond films on quartz substrate”, Diamond and Related Materials, 17, pp.476–480, (2008, April).

89.

U.A.Palnitkar, P. T. Joseph, N. H. Tai, and I. N. Lin, “Adhesion Properties of Nitrogen Ion Implanted Ultrananocrystalline Diamond films on Silicon", Diamond and Related Materials, 17 (2008) 864–867..

90.

Meng-Kao Yeh, Nyan-Hwa Tai, and Bo-Yi Chen, “Influence of Poisson’s Ratio Variation on Lateral Spring Constant of Atomic Force Microscopy Cantilevers, Ultramicroscopy, 108 (2008) 1025– 1029

91.

Yu-Fen Tzeng, Chi-Young Lee, Hsin-Tien Chiu, Nyan-Hwa Tai, I-Nan Lin, “Electron field emission properties on ultra-nano-crystalline diamond coated silicon nanowires”, Diamond & Related Materials, Vol. 17, No. 7-10, pp.1817–1820 (2008)

92.

P.T. Joseph, L. J. Chen, N. H. Tai, U.A. Palnitkar, H. F. Cheng, and I.N. Lin, “Novel methods of growing UNCD coated NCD tips and their field emission property study”, J. nanoscience and Nanotechnology, Vol.8, (2008), 4198–4201.

93.

Ying-Chieh Chen, Nyan-Hwa Tai, I-Nan Lin “Substrate temperature effects on the electron field emission properties of nitrogen doped ultra-nanocrystalline diamond”, Diamond and Related Materials, Vol, 17, pp.457-461.(2008, April)

94.

Meng-Kao Yeh, Nyan-Hwa Tai, Guo-Chian Ling1, and Chi-Yuan Huang, “Electromagnetic Shielding of Multi-walled Carbon Nanotube/Epoxy Nanocomposites” Advanced Materials Research Vols. 47-50 (2008) pp 475-478

95.

Tsung-Han Chen, Tsung-Yen Tsai, Kun-Che Hsieh, Shih-Chin Chang, Nyan-Hwa Tai and Hsuen-Li Chen, “ Two-dimensional metallic nanobowl array transferred onto thermoplastic substrates by microwave heating of carbon nanotubes”, Nanotechnology Vol. 19, p.465303 (2008)

96.

P. T. Joseph, N. H. Tai, H. Niu, U. A. Palnitkar, H. F. Cheng, and I. N. Lin, “Structural modification and enhanced field emission on ultrananocrystalline diamond films by nitrogen ion implantation”, Diamond and Related Materials, Vol. 17, No. 7-10, pp. 1812-1816, (2008, July)

97.

Wen-Tai Hong and Nyan-Hwa Tai, “Investigations on the Thermal Conductivity of Composites Reinforced with Carbon Nanotubes”, Diamond and Related Materials, Vol. 17, No. 7-10, pp.1577-1581, (2008, July)

98.

T. Y. Tsai, Y. A. Li, H.C.Su, N. H. Tai*, K. C. Chen, S. H. Lee, L. H. Chan, Y. Y. Chang, “Low Temperature Growth of Carbon Nanotubes using Ni nanopowder Mixed with Ag-paste as Catalyst”, Diamond and Related Materials, Vol. 17, No. 4-5, pp.594-597, (2008, April)

99.

Lin HK, Tzeng YF , Wang CH, Tai NH, Lin IN, Lee CY, Chiu HT, “Ti5Si3 nanowire and its field emission property”, CHEMISTRY OF MATERIALS, Vol. 20 No. 7, pp. 2429-2431, APR (2008)

100.

Nyan-Hwa Tai, Meng-Kao Yeh, and Tai-Hao Peng, “Experimental Study and Theoretical Analysis on the Mechanical Properties of SWNTs/Phenolic Composites”, Composites-Part B, Vol. 39, No. 6 pp. 920-932 (2008, Sep.)

101.

Joseph P. T., Nyan-Hwa Tai, Yu-Fen Tzeng, C. Y. Lee, Hsiu-Fung Cheng, and I-Nan Lin, “Growth and electron field emission properties of ultrananocrystalline diamond on silicon nanostructures”, Diamond & Related Materials,Accepted. (2009)

102.

Tsung-Yen Tsai; Nyan-Hwa Tai; Kuang-Chung Chan; Shu-Hsing Lee; Lih-Hsiung Chan; Yu-Yang Chang,”Growth of vertically aligned carbon nanotubes on glass substrate at 450℃ through the thermal chemical vapor deposition method”, Diamond & Related Materials,Accepted. (2009)

103.

X. Y. Zhong, Y. C. Chen, N. H. Tai, I. N. Lin, J. M. Hiller and O. Auciello, “Effect of pretreatment bias on the nucleation and growth mechanisms of ultrananocrystalline diamond films via bias-enhanced nucleation and growth: An approach to interfacial chemistry analysis via chemical bonding mapping”, JAP, Accepted, (2009)

104.

Keng-Fu Liu, Li-Ju Chen, Nyan-Hua Tai, and I-Nan Lin, ”Effect of Mo-buffer layer on the growth behavior and the electron field emission properties of UNCD films”, Diamond & Related Materials, Accepted. (2009)

105.

Meng-Kao Yeh, Nyan-Hwa Tai, and Bo-Yi Chen, “Effects of anisotropic material property on the spring constant and the resonant frequency of atomic force microscope cantilever”, Review of Scientific Instruments, 80, 043705, (2009)

106.

P T Joseph P. T., N H Tai, C H Chen, H Niu, H F Cheng, and I N Lin,” On the mechanism of enhancement on electron field emission properties for ultrananocrystalline diamond films due to ion implantation”, Journal of Physics D: Appl. Phys. 42, 105403 (2009)

107.

Ying-Chieh Chen, Don-Ching Lee, Chao-Yang Hsiao, Yu-Fen Chung, Huang-Chin Chen , Joseph P. Thomas, Way-Faung Pong, Nyan-Hwa Tai*, I-Nan Lin, Ing-Ming Chiu*, “The effect of ultra-nanocrystalline diamond films on the proliferation and differentiation of neural stem cells”, Biomaterials 30, 3428–3435 (2009)

108.

P. T. Joseph, N. H. Tai*, C. H. Chen, H. Niu, H. F. Cheng, U. A. Palnitkar, and I. N. Lin, “Field emission enhancement on ultrananocrystalline diamond films by in situ heating during single or multi-energy ion implantation processes”, JAP. Accepted, (2009)

109.

T. Y. Tsai, C. Y. Lee, N. H. Tai*, and W. H. Tuan, ”Transfer of patterned vertically-aligned carbon nanotubes onto plastic substrates for flexible electronics and field emission devices”, APL, in press (文章之圖被取用為當期封面)(2009)

110.

Tsung-Yen Tsai, Tsung-Han Chen, Nyan-Hwa Tai*, Shih-Chin Chang, Hui-Chen Hsu, and Thomas Joseph Palathinkal, “Fabrication of a Carbon Nanotube Array Using a Catalyst-Poisoning Layer in the Inverse Nano Sphere Lithography Method”, Nanotechnology, Accepted, (2009)

C. Patents:

1.

C.Y. Lee, S.K. Chen and N.H. Tai, "Process for Producing Aquafuel by using Carbon Fiber Bundle", US Patent 6217713B1(2001/4/17~2018/7/2).

2.

陳瑞凱, 李紫原, 戴念華, "用碳纖束製造水合燃料之方法", 中華民國專利150052,(91年2月11日~107年5月14日)。

3.

戴念華, 林諭男, 蔡宗岩, “場發射奈米碳管電極及其製造方法”, 中華民國專利, I 231518號(2005)。

4.

李紫源, 戴念華, 謝署旭, “用於製備鋯鈦酸鉛奈米粉末之方法”, 中華民國專利, I 271386號(2006)。

5.

戴念華,楊健鑫,曾士豪, “製作高純度單壁奈米碳管及雙壁奈米碳管絨球及紗束”中華民國專利申請中(2008)。

6.

戴念華,邱建超,蔡宗岩,” 垂直奈米碳管陣列之場發射陰極元件的製作方法及其製品”,中華民國專利申請中。

7.

Nyan-Hwa Tai, Chien-Chao Chiu, Tsung-Yen Tsai, CARBON NANOTUBE ARRAY ELEMENT AND METHOD FOR PRODUCING THE SAME”, Patent pending, USA.

D. Conference Papers:                                    

v

1.

N.H. Tai and T.W. Chou, "Modeling of Chemical Vapor Infiltration (CVI) in Al2O3/SiC Composites Processing", Proceedings of a joint NASA/DOD, Conference, NASA Conference Publication No.3018. Edited by John d. Buckley, Cocoa Beach, FL, USA, pp.237-245 (1988).

2.

N.H. Tai and T.W. Chou, "Theoretical Analysis of Chemical Vapor Infiltration in Ceramic/Ceramic Composites", Material Research Society Symposium Proceedings, Vol. 120, pp.185-192 (1988).

3.

T.W. Chou and N.H. Tai, "Modeling of Processing of Ceramic Matrix Composites", ASME Winter Annual Meeting, Chicago, ILL, USA (1988).

4.

N.H. Tai and T.W. Chou, "Modeling of Fabrication of Ceramic Matrix Composites", Annual Symposium of the Center for Composite Materials, University of Delaware, Newark, DE, USA (1988).

5.

T.W. Chou and N.H. Tai, "Fiber Composite Materials Proceedings of Technical Program", 1988 Annual Convention of Chinese Institute of Engineers in USA., Greater New York Chapter, Newark, NJ, USA, pp.122-126 (1988).

6.

N.H. Tai and T.W. Chou, "Modeling of Chemical Vapor Infiltration (CVI) Process under Pressure and Temperature Gradients for Ceramic Matrix Composites Processing", 91st Annual Meeting of the American Ceramic Society, 81-SI-89, Indianapolis, IND, USA (1989).

7.

N.H. Tai and T.W. Chou, "Modeling of the Improved CVI Process for Ceramic Composites Fabrication", Annual Symposium of the Center for Composite Materials, University of  Delaware, Newark, DE, USA (1989).

8.

N.H. Tai and T.W. Chou, "Effects of Manufacturing Parameters on the Chemical Vapor Infiltration of Ceramic/Ceramic Composites", Proceedings of the 4th Technical Conference on Composite Materials, American Society for Composites, Blacksburg, VA, USA, pp.317-322 (1989).

9.

N.H. Tai and T.W. Chou, "Processing of Ceramic Matrix Composites", Proceedings of the Seventh International Conference on Composite Materials (ICCM/7), Guangzhou, China, (1989).

10.

N.H. Tai and T.W. Chou, "Analytical Simulation of An Improved CVI Process for Forming Highly Densified Ceramic Composites", Material Research Society Symposium Proceedings, Vol. 168, pp.61-66 (1990).

11.

N.H. Tai and T.W. Chou, "Theoretical Modeling of the Chemical Vapor Infiltration Process for Forming Highly Densified Ceramic/Ceramic Composites", Proceeding of the 119th TMS Annual Meeting, Metal and Ceramic Matrix Composites: Processing, Modeling & Mechanical Behavior, The Metallurgical Society, Anaheim, CA, USA, pp.303-309 (1990).

12.

N.H. Tai and T.W. Chou, "Modeling of the Isothermal CVI Process with Pressure Gradients for Forming Ceramic Composites", 92nd Annual Meeting of the American Ceramic Society, Dallas, TX, USA (1990).

13.

N.H. Tai and T.W. Chou, "Modeling and Analysis of Processing of Ceramic Matrix Composites", 24-E-2, Proceedings of the International Conference on Composite Materials (ICCM/8), Honolulu, Hawaii, USA (1991).

14.

C.C.M. Ma, C.J. Chang, C.K. Fang and N.H. Tai, "Pultruded Fiber Reinforced Polyfurfuryl Alcohol Composites-I. Feasibility and Mechanical Properties", Proceedings of the 1992 Annual Conference of the Chinese Society for Materials Science, pp.518-519 (1992).

15.

C.C.M. Ma, W.C. Chang and N.H. Tai, "Effects of Precursor Thermal Aging Fiber Arrangement on the Properties of Carbon/Carbon Composites", Proceedings of the 1992 Annual Conference of the Chinese Society for Materials Science, pp.528-529 (1992).

16.

N.H. Tai and C.C.M. Ma, 1993, "Theoretical Analysis of the Forced-Flow, Temperature-Gradient Chemical Vapor Infiltration (FCVI) Process for Forming Ceramic Matrix Composites", International Conference on Advanced Composites, Wollongong, Australia, Proceeding of Advanced Composites, '93, p.1405 (1993).

17.

C.C.M. Ma, W.C. Chang and N.H. Tai, 1993, "Effects of Precursor Thermal Aging and Fiber Arrangement on the Properties of Carbon/Carbon (C/C) Composites", International Conference on Advanced Composites, Wollongong, Australia, Proceeding of Advanced Composites '93, p.1331 (1993).

18.

C.C.M. Ma and N.H. Tai, "Fatigue Behavior of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Laminated Composites (IV), "The 38th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1993).

19.

C.C.M. Ma and N.H. Tai, "Creep Properties of Carbon Fiber Reinforced PEEK Laminated Composites (III)", The 38th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1993).

20.

C.C.M. Ma, N.H. Tai, W.C. Chang, C.K. Fang and H.T. Chao, "The Influence of Carbon Surface Treatment on the Mechanical Properties and Fracture Behaviors of Carbon/Carbon Composites",  Annual Conference of the Chinese Society for Materials Science (1993).

21.

C.C.M. Ma, S.H. Wu, S.H. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "The Hygrothermal Effect on the Fatigue Behavior of Carbon Fiber/Peek Laminate Composites after Impact(I)", Annual Conference of the Chinese Society for Material Science (1993).

22.

C.C.M. Ma, S.H. Wu, S.S. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of Quasi-Isotropic Laminate of Carbon Fiber Reinforced Polytheretherketone(PEEK) Composites: (II)Under Tension-Compression Loading", 16th ROC polymer Symposium, National Tsing-Hua Univ. (1993).

23.

C.C.M. Ma, S.H. Wu, S.S. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of [90]16 Laminate of Carbon Fiber Reinforced Polytheretherketone (PEEK) Composites: (I)Under Tension Loading", 16th ROC polymer Symposium, National Tsing-Hua Univ. (1993).

24.

N.H. Tai, C.C.M. Ma, W.C. Chang, C.K. Fang and H.T. Chao, "The Influence of Carbon Surface Treatment on the Mechanical Properties and Fracture Behavior of Carbon/Carbon Composites", 16th ROC Polymer Symposium, National Tsing-Hua Univ. (1993).

25.

N.H. Tai, C.C.M. Ma, W.C. Chang and T.W. Chou, "Processing of Carbon/Carbon Composites Based Upon Chemical Vapor Infiltration and Polymer Pyrolysis Methods", The Ninth International Conference on Composite Materials (ICCM/IX), CERAMIC MATRIX COMPOSITE, Modelling and Processing Science, Volume III, p.695, Madrid, Spain (1993).

26.

N.H. Tai, C.C.M. Ma and T.W. Chou, "Modeling of the Self-Adjusted Reactant Flow Path Method For CVI of Ceramic Matrix Composites", The Ninth International Conference on Composite Materials (ICCM/IX), CERAMIC MATRIX COMPOSITE AND OTHER SYSTEMS," Volume II, p.163, Madrid, Spain (1993).

27.

N.H. Tai, C.C.M. Ma, W.C. Chang, C.K. Fang and H.T. Chao, "Effects of the Surface Treatment on the Mechanical Properties and Morphology of Carbon Fiber", The 9th International Conference on Composite Materials (ICCM/9), CERAMIC MATRIX COMPOSITE AND OTHER SYSTEMS, Volume II, p. 629, Madrid, Spain (1993).

28.

H.T. Chao, C.C.M. Ma and N.H. Tai, "Ceramic Coating on the Carbon/Carbon Composites Through the Sol-Gel Technique",(poster) 5th International Symposium on Ceramic Materials & Components for Engines, Shanghai, China (1994).

29.

N.H. Tai, "Theoretical Modeling of the Chemical Vapor Infiltration Process for Fabricating Ceramic Matrix Composites", 5th International Symposium on Ceramic Materials & Components for Engines, Shanghai, China (1994).

30.

C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "Fatigue Behavior of Quasi-Isotropic Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composite (I) Residual Strength Under Tension-Tension Loading", Society of Plastics Engineers, San Francisco, CA, USA (1994).

31.

C.C.M. Ma, N.H. Tai, W.C. Chang, C.K. Fang and H.T. Chao, "The Influence of Carbon Fiber Surface Treatment on the Mechanical Properties of Unidirectional Carbon/Carbon Composites", Society of Plastics Engineers, San Francisco, CA, USA (1994).

32.

C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C. L., I.C. Wu and M.F. Sheu, "Creep Behavior of [±45]4s Laminated Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (I), Society of Plastics Engineers, San Francisco, CA, USA (1994).

33.

C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "Fatigue Behavior of [±45]4s Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (II) under Tension-Tension Loading", The 39th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1994).

34.

C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, C.L., I.C. Wu and M.F. Sheu, "Creep Properties of [±45]4s Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (II)", The 39th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1994).

35.

C.C.M. Ma, N.H. Tai, W.C. Chang, C.K. Fang and H.T. Chao, "Investigations on the Mechanical Properties and Fracture Behaviors of 2-Dimensional Carbon/Carbon composites Fabricated with the Treated Carbon Fibers", The 39th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1994).

36.

戴念華, "化學氣相滲入法製造陶瓷複合材料之理論分析", 第二屆研究成果及應用技術發表會, 臺大工學院國際會議, 83年2月25-26日。

37.

C.C.M. Ma, N.H. Tai and H.T. Chao, "Silicon Carbide Coatings on Carbon/Carbon Composites for Anti-oxidation", Annual Conference of the Chinese Society for Materials Science (1994).

38.

C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang, M.G. Sheu and Y.R. Yang, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset polymer Composites (I) Quasi-Isotropic Laminates Under Tension-Tension Loading", 1994 Annual Conference of the Chinese Society for Materials Science (1994).

39.

C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang, M. F. Sheu and Y. R. Yang, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites (I) [±45]4s Laminates Under Tension-Tension Loading", Annual Conference of the Chinese Society for Materials Science (1994).

40.

N.H. Tai, C.C.M. Ma and S.H. Wu, "Fatigue Behavior of the Graphite/PEEK Composites", First International Conference on Composites Engineering (ICCE/1), New Orleans, LA, USA (1994).

41.

C.C.M. Ma, N.H. Tai, W.C. Chang and H.T. Chao, "Oxidation Behaviors of Carbon/Carbon Composites", 17th ROC polymer Symposium, National Tsing-Hua Univ. (1994).

42.

J.F. Wu, C.C.M. Ma, C.S. Tsai, N.H. Tai, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu, "Damage Mechanism of Matrix Dominated Polymer Based Laminated Composites Under Fatigue Loading", 17th ROC polymer Symposium, National Tsing-Hua Univ. (1994).

43.

J.F. Wu, C.C.M. Ma, N.H. Tai, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu. "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites (III) Quasi-Isotropic Laminates Under Tension-Compression Loading", 17th ROC polymer Symposium, National Tsing-Hua Univ. (1994).

44.

S.H. Lin, C.C.M. Ma, N.H. Tai, J.F. Wu, J.M. Lin, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading", 17th ROC polymer Symposium, National Tsing-Hua Univ., Univ. (1994).

45.

N.H. Tai, "Theoretical Analysis of the Chemical Vapor Infiltration Process for Fabricating Laminated Ceramic Composites", 中華民國尖端材料科技協會第三屆年會暨學術研討會, 民國八十三年十月7-8日。

46.

N.H. Tai, C.C.M. Ma, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu. "Fatigue Behavior of Quasi-isotropic Lamiates of Carbon Fiber Reinforced Polymer Composites Under Tension-Tension Loading”, 中華民國尖端材料科技協會第三屆年會暨學術研討會, 民國八十三年十月7-8日。(本論文獲"1994尖端材料研討展示會"之學生論文競賽第二名)

47.

C.C.M. Ma, W.C. Chang and N.H. Tai, "Dynamic Mechanical Properties of Carbon-Carbon Composites", IUMRS-94-Taiwan (1994).

48.

C.C.M. Ma, S.H. Lin, N.H. Tai, S.H. Wu, C.L. Ong, I.C. Wu and M.F. Sheu. "Fatigue Behavior of [±45]4s laminate Composites of Carbon Fiber Reinforced Polyetheretherketone (PEEK)", IUPAC-94-Taiwan, Invited (1994)

49.

C.C.M. Ma, S.H. Li and N.H. Tai, "Static ad Dynamic Mechanical Properties of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading", IUPAC-94-Taiwan (1994).

50.

N.H. Tai, C.C.M. Ma, J.F. Wu, S.H. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu "Fatigue Behavior of Quasi-isotropic Gr/PEEK and Gr/Epoxy Lamiates", IUPAC-94-Taiwan (1994).

51.

C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites I. [±45] Laminate under Tension-Tension Loading", ICCM-10, Vancouver, Canada (1995).

52.

N.H. Tai, C.C.M. Ma, J.F. Wu, S.H. Lin, G.Y. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu."Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites II. Quasi-isotropic Laminate under Tension-Tension Loading", The 40th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1995).

53.

S.H. Lin, C.C.M. Ma and N.H. Tai, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites under Tension-Tension Loading", Abstract accepted, The 40th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1995).

54.

W.C. Chang, H.T. Chao, N.H. Tai and C.C.M. Ma, "Effect of Silicon Carbide Coating on the Anti-oxidation of Carbon/Carbon Composites", The 40th International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1995).

55.

S.H.Lin, C.C.M.Ma, and N.H. Tai, "Fatigue Behavior of Long Fiber Reinforced Polyamide and Polycarbonate Composites Under Tension-Tension Loading", Society of Plastics Engineers, San Francisco, CA, USA (1995).

56.

C.C.M. Ma, N.H. Tai, J.F. Wu, S.H. Lin, G.Y. Wu. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites, (I)[±45]4s Laminate under Tension-Tension Loading", ICCM/10, British Columbia, Canada, (1995).

57.

N.H. Tai, C.Y. Lee, and I.H. Liu "SiC Coating Through Chemical Vapor Deposition and Reaction Sintering on Carbon/Carbon Composites", ICCM/10, British Columbia, Canada (1995).

58.

H.K. Liu, N.H. Tai and W.H. Chen "Investigations on the Fabrication of Composite Materials Prepared Through Filament Winding", ICCM/10, British Columbia, Canada (1995).

59.

W.C. Chang, H.T. Chao, C.C.M. Ma and N.H. Tai, "Oxidation Behavior and Mechanisms of Carbon/Carbon Composites", ICCM/10, British Columbia, Canada (1995).

60.

C.C.M. Ma, S.H.Lin, L.H. Perng, N.H. Tai and H.F. Meng "Mechanical Properties of Injection Molded Long Glass Fiber Reinforced Rubber Toughened Polyamide 6 Composite", Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995).

61.

C.C.M. Ma, N.H. Tai, G.Y. Wu, S.H. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites (I) Quasi-Isotropic Laminate under Tension-Compression Fatigue Loading Test", Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995).

62.

C.C.M. Ma, N.H. Tai, G.Y. Wu, S.H. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites (II) [±45]4s Laminate under Tension-Tension and Tension-Compression Fatigue Loading Tests", Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995).

63.

陳韋宏, 劉顯光, 戴念華, "纏絲法製造複合材料及其分析", 中國材料年會, Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995).

64.

Y.P. Tsai, W.C. Chang, N.H. Tai and C.C.M. Ma, "Densification of the Carbon-Carbon Composites Through the Isothermal Chemical Vapor Infiltration Process", Annual Conference of the Chinese Society for Materials Science, Tai-chung (1995).

65.

C.C.M. Ma, N.H. Tai, S.H. Lin, S.H. Wu, J.F. Wu, C.L. Ong, Y.C. Chang and M.F. Sheu "Fatigue Behavior of [±45]4s Laminate of Carbon Fiber Reinforced Polyetheretherketone (PEEK) Composites (I) under Tension-Tension Loading at Various Frequencies", ICCE/2, New Orleans, LA, USA (1995).

66.

C.C.M. Ma, S.H. Lin, J.F. Wu, N.H. Tai, C.L. Ong, I.C. Wu and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Thermoplastic and Thermoset Polymer Composites (II) Quasi-Isotropic Laminates under Tension-Tension Loading" ICCE/2, New Orleans, LA, USA (1995).

67.

N.H. Tai, W.C. Chang, C.C.M. Ma and Y.P. Tsai, “Fabrication of Carbon/carbon Composites Through the Chemical Vapor Infiltration”, ICCE/2, New Orleans, LA, USA (1995).

68.

W.C. Chang, H.T. Chao, C.C.M Ma and N.H. Tai, “Oxidation Behaviors and Mechanisms of Carbon/Carbon Composites”, Society of Plastics Engineerings, San Francisco, CA, USA (1995).

69.

N.H. Tai, Y.P. Tsai, C.C.M Ma and W.C. Chang, “Morphologies and Mechanical Properties of Carbon/Carbon Composites Densified Through CVI Process”, 18th ROC Polymer Symposium, National Tsing-Hua Univ. (1995).

70.

C.C.M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites Subjected to Low Impact Energy (I) Quasi-Isotropic Laminated Tension-Compression Fatigue Test", 18th ROC Polymer Symposium, National Tsing-Hua Univ. (1995).

71.

C.C. M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites Subjected to Low Impact Energy (II) [±45]4S Laminated Tension-Compression Fatigue Test", 18th ROC Polymer Symposium, National Tsing-Hua Univ. (1995).

72.

C.C. M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Tension-Compression Fatigue Behavior of Carbon Fiber Reinforced Epoxy Quasi-Isotropic Laminated Composites Subjected to Low Energy Impact", 41st International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1996).

73.

C.C. M. Ma, G.Y. Wu, S.H. Lin, J.M. Lin, N.H. Tai, C.L. Ong, Y.C. Chang and M.F. Sheu, "Fatigue Behavior of Carbon Fiber Reinforced Epoxy Composites-[±45] 4S Laminate Under Tension-Tension and Tension-Compression", 41st International SAMPE Symposium and Exhibition, Anaheim, CA, USA (1996).

74.

N.H. Tai, C.C.M. Ma, M.C. Yip, C.L. Lin and G.Y. Wu, "Influence of Low-Energy Impact on Fatigue Behavior of the Carbon/Epoxy Laminate Composites", International Conference on Advanced Materials, Beijing, China (1996).

75.

J.M. Lin, C.C. M. Ma, N.H. Tai, J.M. Lin, C.L. Ong, Y.C. Chang and M.F. Sheu, "Tension-Compression Fatigue Behavior of [±45]8s Carbon Fiber Reinforced Epoxy Laminated Composites Before and After Low Energy Impact”, 19th ROC Polymer Symposium, National Tsing-Hua Univ. (1996).

76.

林士元, 劉顯光, 戴念華, "纏繞法製程及幾何參數對複材圓管機械性質的影響", 中國機械工程年會, 台北 (1996).

77.

M.C. Yip, C. M. Tseng and N.H. Tai, “Effects of Thermocycling on Fatigue Behavior of the Carbon/PEEK Composites”, The Third Int. Conf. On Fracture & Strength of Solids, Hong Kong (1997).

78.

J.M. Lin, C. C.M. Ma, N.H. Tai, C. L. Ong, Y. C. Chang and M. F. Sheu, “Tension-Compression Fatigue Behavior of Carbon Fiber Reinforced Epoxy Laminates Before and After Low Energy Impact”, 20th ROC Polymer Symposium, National Tsing-Hua Univ. (1997).

79.

N.H. Tai, M.K. Yeh, W.C. Tai, C. H. Yang and Nelson Lin, “Composite Plates Made with Recycled Circuit Board”, ICCE/4, Hawaii, USA (1997).

80.

N.H. Tai, M. C. Yip, C. M. Tseng and H. C. Yu, “Fatigue Behavior of the Carbon/Epoxy and the Carbon/PEEK Composites Subjected to Low-energy Impact”, ICCM-11, International Conference for Composite Materials, Gold Coast, Australia (1997).

81.

N.H. Tai, M.K. Yeh, W.C. Tai and Nelson Lin, “Composite Plates Made with Recycled Circuit Boards and Fibrous Mats”, Annual Meeting of SAMPE-Taiwan Chapter, World Trade Center, Tai-chung (1997).

82.

N.H. Tai, C.C.M. Ma, J. M. Lin, G.Y. Wu, “Effects of Thickness on Impact and Fatigue Behaviors of the Quasi-Isotropic Gr/Epoxy Composites Before and After Low Energy Impacts”, Sept. 15-19, Japan, IUMRS-97.

83.

林士元, 劉顯光, 戴念華, "纏繞法之幾何參數對複合材料管件衝擊性能之影響分析", 中國機械工程學會, 第十四屆全國學術研討會, 中央大學, 中壢 (1997).

84.

N.H. Tai, K. P. Lee, H Hocheng and C.S. Liu “Processing and Characterization of Carbon Fiber Reinforced Ceramic Nanocomposites”, EnCera ’98 & HT-CMC 3, Osaka, Japan (1998).

85.

M.K. Yeh, N.H. Tai, Wen-Chi Tai and Nelson Lin, “Mechanical Strengths of Composite Plates Fabricated from Recycles Circuit Boards”, The First Asian-Australian Conference on Composite Materials, Osaka, Japan (1998).

86.

戴念華, 葉銘泉, 高鉦翔, ”衝擊及熱循環負載對擬均向性Gr/PEEK複合材料之拉伸-壓縮疲勞行為之影響”, Annual Meeting of SAMPE-Taiwan Chapter, World Trade Center, Tai-chung (1998).

87.

陳志成, 劉顯光, 戴念華, ”複合材料纏繞成型強化混凝土圓柱對衝擊後抗壓強度的影響與分析”, Annual Meeting of SAMPE-Taiwan Chapter, World Trade Center, Tai-chung (1998).

88.

戴念華, 葉銘泉, 曾志明, ”衝擊及熱循環負載對擬均向性Gr/PEEK複合材料之拉伸-拉伸疲勞行為之影響", 中國機械工程學會,第十五屆全國學術研討會 (1998).

89.

J.M Lin, C.C.M. Ma, N. H. Tai, W.J. Wu and C.Y. Chen, “ Preparation and Properties of SiC Modified Carbon/Carbon Composites by Carbothermal Reduction Reaction”, Antech Conference Proceedings of the 22nd ROC Polymer Symposium (1999).

90.

戴念華, 楊怡寬, 鄧禮成, ”碳/碳複合材料之抗氧化能力及其氧化後之機械性質探討”,第二十二屆高分子研討會 (poster),新竹交通大學 (1999).

91.

N.H. Tai, I.K. Yang and L.C. Deng, “Mechanical Properties Degradation of Carbon/Carbon Composites after Slight Oxidation”, 44th International SAMPE Symposium, Long Beach, CA, USA (1999).

92.

J.M. Lin, C.C.M. Ma, N.H. Tai, W.J. Wu and C.Y. Chen, “SiC Modified Carbon/Carbon Composites by Carbothermal Reduction Reaction (I) Preparation and Properties”, Antech Conference (1999).

93.

Nyan-hwa Tai and Che-Fu Chen, “Fabrication of Carbon/SiC Nanocomposites Through the Slurry Impregnation and Pulse Chemical Vapor Infiltration (PCVI) Method”, 首屆海峽兩岸碳材料研討會論文集,上海,七月,(2000)。

94.

Meng-Kao Yeh, Nyan-Hwa Tai, Shyh-Shiuan Chou. “Mechanical Strength of Gr/PEEK Laminates Repaired after Low-Energy Impact”, The Second Asian-Australasian Conference on Composite Materials (ACCM-2000). Kyongju, Korea, 18-20 August, 2000

95.

戴念華,李紫原,陳金銘,王富田,”不同前驅體所製作之碳粉及此碳粉添加奈米碳粉對鋰二次電池充放電性質之影響”,首屆海峽兩岸碳材料研討會論文集,北京,清華大學,Oct. 13, (2000)

96.

C.K. Kao, W.H. Lin, H. Chang, C.H. Tsai, N.H. Tai, C.C. Chi, I.N. Lin, “Optical Properties of Sol-Gel Derived SiO2 Thin Films”, Asian Meeting on Ferroelectrics, 12-15 Dec., 2000, PoluU, Hong Kong, China.

97.

戴念華,葉孟考,陳正松 ”擬均向性碳纖維強化聚醚醚酮複材疊層板承受低能量衝擊並經修補後之靜態及拉伸-壓縮疲勞性質研究”, 第二十四屆中華民國力學學會年會暨全國力學會議,中壢,中原大學,十二月九、十日,(2000).

98.

戴念華,李紫原,王富田 ”添加奈米碳粉於碳化環氧樹脂中以製備鋰二次電池碳電極之研究”, 第屆中華民國材料學會年會,高雄,義守大學,十一月二十四、五日,(2000)

99.

戴念華,李紫原,陳金銘 ”以酚醛樹脂為前驅體製作碳粉與探討其對鋰離子二次電池充放電性之影響”, 兩岸清華大學九十週年校慶尖端材料科技研討會,北京 清華大學,四月二十七日,(2001) .

100.

Nyan-hwa Tai and Che-Fu Chen, “Effects of processing parameters on the growth of SiC Nanofibers in the fabrication of carbon/SiC nanocomposites’, ICCM-13, Beijing, China, June, 25, (2001).

101.

Nyan-Hwa Tai, Cheng-Hsiung Lin, Yi-Nein Lai, and I-Nan Lin, “Effect of nano-powder incorporation on characteristic of PZT films”, 10th International Meeting on Ferroelectricity, Madrid Spain, Sep. 3-7, 2001.

102.

Nyan-Hwa Tai and Che-Fu Chen, “Nanofiber Growth in the Fabrication of Ceramic Matrix Nanocomposites Through Pulsed Chemical Vapor Infiltration (PCVI), 第二屆海峽兩岸碳材料研討會論文集,中興大學,十一月,(2001)。

103.

陳瑞凱,鄭慧雯,李裕安,徐統,戴念華,”鋅陽極製程因素探討”, 上海輕型電動車研討會,上海,中國 (2001)

104.

Chien-Chao Chiu, Nyan-Hwa Tai, and I-Nan Lin,  “Insitu Raman Examination of Carbon Nanotubes Formation on the Surface of Diamond Films for Improving Electron Field Emission Properties” Tsukuba Symposium on Carbon Nanotube in Commemoration of the 10th Anniversary of Its Discovery, Oct.3-5, 2001, Tsukuba, Japan

105.

Nyan-Hwa Tai, Yu-long Lee, Cheng-Hsiung Lin, and I-Nan, Lin, “Ferroelectric Properties of Pb(Zr1-xTix)O3 Graded Thin Films Prepared by Pulsed Laser Deposition Process”, Integrated Ferroelectrics (ISIF), Japan, May (2002)

106.

Nyan-Hua Tai, Yu-Mei Shen, Tong-Hsu, and I-Nan Lin. ”Thick Pb(Ni1/3Nb2/3)O3-(Pb1-x) (Ti1-yZry)O3 Films Prepared by Tape-casting”, Integrated Ferroelectrics (ISIF), Nara, Japan, May (2002)

107.

Nyan-Hua Taia, Yu-Mei Shena, Tong-Hsua, and I-Nan Linb, “Preparation of thick piezoelectric films on silicon substrate by laser lift-off technique”, IFFF, Nara, Japan, May (2002)

108.

Y.J. Shu, C. C. Chiu, N.H. Tai, I.N. Lin, C. T. Chia, “Carbon Nanotube Formation on the Surface of Diamond-Like Carbon Film”, 13 European on Diamond, Diamond-like Materials, Carbon Naotubes, Nitrides & Silicon Carbide, 8-13, Sept. 2002, Granada, Spain

109.

李昆育,戴念華,林諭男 “以固態法製備PNN-PZT粉末及其特性量測”, 中國材料科學學會,2002年材料年會,91年11月22-23日,台灣大學 (poster)

110.

方柏超,陳瑞凱,林樹均,鄭慧雯,徐統,李裕安,戴念華 “鋅陽極製程因素探討”, 中國材料科學學會,2002年材料年會,91年11月22-23日,台灣大學(poster)

111.

邱建超,戴念華,賈至達,林諭男 “以熱處理鑽石與類鑽石薄膜成長奈米碳管之研究”, 中國材料科學學會,2002年材料年會,91年11月22-23日,台灣大學 (poster)

112.

蔡宗岩,戴念華,鄭秀鳳,林諭男 “以溶凝法製備催化劑成長奈米碳管之場發射性質研究”, 中國材料科學學會,2002年材料年會,91年11月22-23日,台灣大學 (poster)

113.

邱奕璋,戴念華,李紫原,林諭男 “外加電場對化學氣相沉積法製備一維碳材之製程參數探討與性質研究”, 中國材料科學學會,2002年材料年會,91年11月22-23日,台灣大學 (poster)

114.

薛詳明,蔡宗岩,戴念華,李紫原,“以懸浮觸媒法量產奈米碳纖維之研究”, 中國材料科學學會,2002年材料年會,91年11月22-23日,台灣大學 (poster)

115.

Nyan-Hwa Tai, I-Chang Chiu , Chi-Young Lee, “Investigation on the Synthesis of One- dimensional Carbon Materials in the Chemical Vapor Deposition Process ”Workshop on Selective, Patterned and Self-assembled Growth of Nano-structures, Hong Kong, Jan. 5-8, (2003)

116.

Nyan-Hwa Tai, Chi-Young Lee, I-Chang Chiu, and I-Nan Lin, “Effects of Electric Field on the Growth of One-dimensional Carbon Materials in the Chemical Vapor Deposition Process”, 2003 Nanotechnology and Trade Show, San Francisco, California, U.S.A., February 23-27, (2003)

117.

Nyan-Hwa Tai, Meng-Kao Yeh, Chia-Hao Liu, Hsiang-Ming Hsueh, Chan-hsin Yang, “Synthesis of Carbon Nanotubes and Characterization of CNTs/Phenolic Composites”, ICCM-14, San Diago, CA, USA, July 14-18, (2003)

118.

Hsiang-Ming Hsoeh, Nyan-Hwa Tai Chi-Yuan Lee, “Electrochemical Properties of the Multi Wall Carbon Nanotube Electrode for Secondary Lithium-ion Battery”, Conference for Nanotechnology, Greece, Aug. 29-Sept.13 (2003)

119.

Tsung-Yen Tsai, Nyan-Hwa Tai, and I-Nan Lin, “Characteristics of Carbon Nanotube Electron Field Emission Devices Prepared by LTCC Process”, Diamond-2003, Salzburg, Austria, (2003)

120.

H.M. Hseuh, N.H. Tai, T.P. Perng, S.D. Chyou, M.K. Yeh, C.H. Liu, “Fabrication and Characterization of Nanocomposites Reinforced by Carbon Nanotubes – (1) Synthesis of Carbon Nanotubes”,  Proceedings of the 3rd Cross-strait Conference on Composites Materials, Key Engineering Materials, V. 249, p 65, Wuhen, China, Oct.9-10 (2003)

121.

林永振,周正賢,戴念華,黃金花,林諭男,“電感式耦合電漿化氣相沉積法低溫成長氮化鋁”, 中國材料科學學會,2003年材料年會,92年11月21-22日,崑山科技大學

122.

Nyan-Hwa Tai, Tsung-Yen Tsai, and I-Nan Lin, “Influence of electrode configuration on the electron emission properties of multi-walled carbon nanotubes”, 2004 Nanotechnology Conference and Trade Show, March 7-11, 2004, Boston, Massachusetts, U.S.A.

123.

Nyan-Hwa Tai, Kun-Yu Lia and I-Nan Lin, “Preparation of PNN-PZT Thick films on Pt coated silicon substrates by using Laser-Lift-Off process”, 16th International Symposium on Ferroelectrics, April 5-8, ISIF 2004, Gyeongju, Korea

124.

Yung-Chen Lin, Cheng-Hsien Chou, Nyan-Hua Tai, Jin-Hua Huang, and I-Nan Lin “Pb(Zr,Ti)O3 thin film on AlN buffered Si and its application to ferroelectric nonvolatile memory field-effect transistors”, 16th International Symposium on Ferroelectrics, April 5-8, ISIF 2004, Gyeongju, Korea.

125.

Cheng-Hsien Chou, Yung-Chen Lin, Jin-Hua Huang, Nyan-Hua Tai, and I-Nan Lin “Low Temperature synthesis of AlN Films by ICP-assisted Metalorganic Chemical Vapor Deposition Method”, 16th International Symposium on Ferroelectrics, April 5-8, ISIF 2004, Gyeongju, Korea

126.

C.C. Chiu, N.H. Tai, M. K. Yeh, B. Y. Chen, “Tip-to-tip growth of aligned carbon nanotube under electric field, “Diamond-2004, Aug. 13-20, Italy, (2004)

127.

陳伯毅,葉孟考,戴念華“原子力顯微鏡探針懸臂之非線性變形行為分析”, 第八屆 奈米工程暨微系統技術研討會, 清華大學動機系, 台灣 (2004)

128.

Meng-Kao Yeh, Nyan-Hwa Tai, Jia-Hau Liu, “ Mechanical Characterization of CNTs/Phenolic Composites”, The 4th Australasian Congress on Applied Mechanics, 16th ~18th, Feb. 2005, Melbourne, Victoria, Australia

129.

Meng-Kao Yeh, Nyan-Hwa Tai, Jia-Hau Liu, “ Dynamic Mechanical Analysis of Carbon Nanotubes/Phenolic Composites”, The 6th International Conference on Fracture and Strength of Solids, Bali, April 4-6, (2004)

130.

C.C. Chiu, N.H. Tai, ”Growth of high quality single-walled carbon nanotubes (SWNTs) through the thermal chemical vapor deposition method by using co-sputtering Fe-Mo films as catalyst”, Asian CVD-III, Taipei, Nov. (2004)

131.

C.C. Chiu, N.H. Tai, ”Synthesis of aligned carbon nanotubes using rapid heating and cooling system in the thermal chemical vapor deposition process”, Asian CVD-III, Taipei, Nov. (2004) (1st place of Poster Presentation)

132.

Nyan-Hwa Tai1, Meng-Kao Yeh2, Yen-Jiun Lin2, “Studies on the Mechanical Properties of the Carbon Nanotube Reinforced Phenolic Composites”, Fifth International Conference on Composite Science & Technology, ICCST/5, American University of Sharjah, Sharjah, United Arab Emirates on February 1, (2005)

133.

C.M. Lee, C.C. Chiu, N.H. Tai, C. Y. Lee, “Synthesis of Large Scale and Aligned Carbon Nanotubes Array by Thermal Chemical Vapor Deposition”, 中國材料科學學會, 2004年材料年會,93年11月17-18日,工研院

134.

Yung-Chen Lin, Cheng-Hsien Chou, Nyan-Hwa Tai, Jin-Hua Huang, I-Nan Lin, Pb(Zr, Ti)O3 thin film deposites using AlN buffer layer and its ferroelectric properties”, 中國材料科學學會, 2004年材料年會,93年11月17-18日,工研院

135.

Ying-Hao Chu, Ying-Chieh Chen, Su-Jien Lin, Kuo-Shung Liu, Nyan-Hwa Tai, and I-Nan Lin, “C-V Characteristics of Pt/Pb(Zr, Ti)O3/Si MFIS Structure Prepared by Laser Deposition at very Low Substrate Temperature”, 中國材料科學學會, 2004年材料年會,93年11月17-18日,工研院

136.

Cheng-Hsien Chou, Yung-Chen Lin, Jin-Hua Huang, Nyan-Hwa Tai, I-Nan Lin, “Synthesize Highly-textured AiL Thin Films and Study on Its Application to Thin Film Bulk Acoustic Wave Resonators”, 中國材料科學學會, 2004年材料年會,93年11月17-18日,工研院 (優等獎)

137.

C.H. Yang, C.C. Chiu, N.H. Tai, C.Y. Lee, “Synthesis of Single Walled and Double Walled Carbon Nanotubes Through the Floating Catalyst Method”, 中國材料科學學會, 2004年材料年會,93年11月17-18日,工研院

138.

Yeh, M. K. Tai, N. H. and Liu, J. H., 2005, "Mechanical Characterization of CNTs/Phenolic Composites," Proceedings of the 4th Australasian Congress on Applied Mechanics, Advances in Applied Mechanics, February 16-18, Melbourne, Australia, pp. 505-509 (NSC93-2212-E007-047)

139.

N. H. Tai, M. K. Yeh, Y. J. Lin, “Investigation on the mechanical properties of the hybrid nanocomposites reinforced by carbon nanotubes and short carbon fibers”, Sixth International Conference on the Science and application of Nanotubes Chalmers Conference Centre, June 26 - July 1, 2005, Göteborg, Sweden

140.

Ying-Chieh Chen, Chia-Yun Chen, Nyan-Hwa. Tai, Yen-Chih Lee, Su-Jien Lin, I-Nan Lin, Characterization of ultra-nano-crystalline diamond films grown on the porous anodic alumina template”, 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學

141.

陳莉茹, 李彥志, 戴念華,l 李紫原, 林樹均, 林諭男, “不同成核方式對低溫超奈米微晶鑚(UNCD)沉積的影響”, 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學

142.

周正賢, 林永振, 戴念華, 黃金花, 林諭男, “以氧化鋁薄膜製作薄膜體聲波濾波器之應用” , 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學

143.

蘇信昌, 蔡宗岩, 陳伯毅, 戴念華, 葉孟考, 邱正茂, “以網印法製被奈米碳管場發射陰極之研究”, 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學

144.

孫志光, 戴念華, 黃繼遠, “奈米碳管複合材料電磁波屏蔽性質之研究”, 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學

145.

陳嘉勻, 邱建超, 戴念華, “The effects of aluminum support layer on the growth of single-walled carbon na otubes”, 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學

146.

曾士豪, 邱建超, 戴念華, 李紫原, ”Large-scale production and photoacoustic effects of single-walled carbon nanotubes”, 中國材料科學學會, 2005年材料年會,94年11月24-25日,淡江大學  (佳作獎)

147.

Shih-Hao Tseng and Nyan-Hwa Tai,“Oxidation of embedded iron clusters in CNTs under

photoflash exposure”, NANOTUBE 2006, June 18-23, Nagona, Japan

148.

Tsung-Yen Tsai and Nyan-Hwa Tai, “Field emission properties of carbon nanotubes and carbon fibers prepared by thermal chemical vapor deposition”, NANOTUBE 2006, June 18-23, Nagona, Japan

149.

Nyan-Hwa daniel Tai, Effects of water vapor on the growth of single-walled carbon nanotubes synthesized”, NANOTUBE 2006, June 18-23, Nagona, Japan

150.

N.H. Tai, M.K. Yeh,C.H. Yang, S.H. Tseng, C.C. Chiu, T.-Y. Tsai, J.H. Liu, and T-H Peng, “Synthesis of Carbon Nanotubes and Its Applications in Composites and Field Emission Light THERMEC' 2006 International Conference on Processing & Manufacturing of Advanced Materials, July 4-8, 2006, Vancouver, Canada

151.

Nyan-Hwa Tai, Meng-Kao Yeh, Tai-Hao Peng, “Mechanical Properties of Nanocomposites Reinforced by Single-walled Carbon Nanotubes”,第五屆海峽兩岸複合材料研討會, Oct. 22~26, 2006,上海、溪口。

152.

Meng-Kao Yeh, Nyan-Hwa Tai, and Yan-Jyun Lin, “Glass Transition Temperature of Phenolic-based Nanocomposites Reinforced by MWNTs and Carbon Fibers”, ACCM-5, Hong Kong, Nov. 26-29, (1006)

153.

林俊言, 曾士豪, 蔡宗岩, 戴念華, ”以流動觸媒法在垂直爐管成長單壁奈米碳管之研究” 中國材料科學學會, 2006年材料年會,95年11月24-25日,成功大學(佳作獎)

154.

葉澤宏, 蔡宗岩, 曾士豪, 戴念華, “以化學氣相沉積法成長選區跨接碳管之研究”, 中國材料科學學會, 2006年材料年會,95年11月24-25日,成功大學

155.

劉峻誠, 劉晏倫, 戴念華, 黃金花, 林喻男, “超微奈米鑽石薄膜製作平面場發射元件與其電子場發射特性”, 中國材料科學學會, 2006年材料年會,95年11月24-25日,成功大學

156.

戴信一, 戴念華, 邱正茂, 賴詩文, ”氧化鎂與奈米鑽石微晶複合薄膜在鐵鎳合金上之二次電子產生率的研究”, 中國材料科學學會, 2006年材料年會,95年11月24-25日,成功大學

157.

Thomas Joseph Palathinkal, Yen-Chih Lee, Hsiu–Fung Cheng, Nyan-HwaTai, and I-Nan Lin, 2006, “Microwave Dielectric Properties of (Bax,Sr1-x)TiO3-Ba4Ti13O30 Tunable Thick Films”, 4th MMA2006: 12-16 June 2006 Oulu, Finland.

158.

Thomas Joseph Palathinkal, Debabrata Pradhan, Nyan-Hwa Tai, Hsiu-Fung Cheng, and I-Nan Lin, 2006, “Effect of Substrates on the Growth of Ultrananocrystalline Diamond”, ICNDST & ADC Joint Conference: the joint International Conference on New Diamond Science and Technology and the Applied Diamond Conference, North Carolina, USA, May 15-18, 2006.

159.

Nyan-Hwa Tai1, Meng-Kao Yeh, and Tai-Hao Peng, ”Experimental Study and Theoretical Analysis of the SWNTs/Phenolic Nanocomposites”, International Conference on Experimental Condensed Matter Physics, Advanced Nano Materials – ANM 2007, Jan. 8th-10th, 2007

160.

Tsung-Yen Tsai, Yu-An Li, and Nyan-Hwa Tai, “Low Temperature Growth of Carbon Nanotubes using Ni-nanopowder Mixed with Ag-paste as Catalyst New Diamond and Nano Carbons "NDNC2007", Osaka, Japan, from 28 to 31 May 2007.

161.

Y.C. Chen, N.H. Tai, I.N. Lin, M. Wasahtwadana, D. G. Schlom, O. Auciello, ”Effects of Template Layer and Nucleation Stage on Highly-oriented Diamond Film Growth on Silicon”, NDNC2007", Osaka, Japan, from 28 to 31 May 2007.

162.

Min-Lian Kuo, Tsung-Yen Tsai, Nyan-Hwa Tai, Lih-Hsiung Chan, Kuang-Chung Chen, Yu-Yang Chang, “Low Temperature Growth of Carbon Nanotubes on Glass Substrate through the Thermal Chemical Vapor Deposition Method Using a Binary Catalyst System”, International Display Manufacturing Conference 2007 (IDMC’07)

163.

Shih H. Tseng, Nyan H. Tai, “Controlled electric behavior of vertical aligned carbon nanotubes reinforced composite fabricated through immersion process”, ICCE-15: The Fifteenth International Conference on COMPOSITES/NANO ENGINEERING, July 15-21, 2007, Haikou, Hainan Island, China

164.

Wen-Tai Hong and Nyan-Hwa Tai, “Studies on the Thermal Conductivity of Nanocomposites Reinforced with Carbon Nanotubes (CNTs), DIAMOND 2007,9-14 September 2007, Berlin, Germany

165.

P. T. Joseph, L. J. Chen, N. H. Tai, U. A. Palnitkar, H. F. Cheng, and I. N. Lin, “Transparent ultrananocrystalline diamond films on quartz substrate”, NDNC, Osaka, Japan,  28-31 May 2007.

166.

P. T. Joseph, N. H. Tai, H. Niu, U. A. Palnitkar, H. F. Cheng, and I. N. Lin, “Enhanced field emission from plasma treated and nitrogen doped ultrananocrystalline diamond films” Diamond 2007, 9-14 September 2007, Berlin, Germany.

167.

P. T. Joseph,戴念華,鄭秀鳳,林喻男,“Ultrananocrystalline diamond films for transparent protective coating applications” 中國材料科學學會, 2008年材料年會,96年11月16-17日,交通大學

168.

楊杰舜 曾士豪,蔡宗岩,戴念華,“上閘極單壁奈米碳管場效電晶體之研究” 中國材料科學學會, 2008年材料年會,96年11月16-17日,交通大學

169.

陳銘雄,戴念華,“以Fe催化劑於Si基板上成長垂直奈米碳管之研究” 中國材料科學學會, 2008年材料年會,96年11月16-17日,交通大學

170.

劉竣誠,戴念華,林喻男,“超奈米微晶鑽石薄膜在鉬、鎢基板上的成長現象” 中國材料科學學會, 2008年材料年會,96年11月16-17日,交通大學

171.

Y. C. Chen, X. Y. Zhong, A. Konicek, D. S. Grierson, N. H. Tai, I. N. Lin, B. Kabius, J. M. Hille, Fundamentals of Smooth Ultra-nanocrystalline Diamond Films Via Low Pressure Bias-Enhanced Nucleation and Growth, NDNC, 2008, Taipei

172.

P. T. JOSEPH, N. H. TAI, H. F. CHENG, I. N. LIN, ”Nitrogen doped ultrananocrystalline diamond films as N-type window materials for solar cell applications:, International Conference on Solar Cells, IC-SOLACE, Kochi, India, Jan. 21-23, 2008 (Second place)

173.

葉孟考,戴念華,吳宗憲 ”,,,以實驗與有限單元法探討骨水泥之機械性質”,中華民國力學學會第32屆會議,台灣嘉義中正大學2008年11月28-29日

174.

Jia-Rong Liang, Shih-Hao Tseng, Tsung-yen Tsai, Meng-Kao Yeh and Nyan-Hwa Tai, “Synthesis of carbon nanotubes and its applications in composites and field emission light”, ICCE-16, July 20-26, 2008 in Kunming, China

175.

戴念華, “Synthesis and Applications of Carbon Nanotubes”,兩岸清華大學納(奈)米材料科技學術研討會,Oct. 27-28, 2008

176.

戴念華, “Bactericidal properties of Multi-walled Carbon Nanotubes”,第六屆兩岸複合材料研討會, Nov. 21-22, 2008

177.

許惠珍,彭淑芬,曾士豪,蔡宗岩,戴念華,宋信文“多壁奈米碳管對於大腸桿菌的抑菌活性之研究” 中國材料科學學會, 2008年材料年會,97年11月21-22日,台北科技大學

178.

林坤賢,曾士豪,蔡宗岩,陳伯毅,戴念華,葉孟考,“電場校應對於成長單壁奈米碳管影響之研究” 中國材料科學學會, 2008年材料年會,97年11月21-22日,台北科技大學

179.

賴冠樺,戴念華,李紫原 “利用交流阻抗法探討染料敏化型太陽能電池之內電阻對轉換效率的影響” 中國材料科學學會, 2008年材料年會,97年11月21-22日,台北科技大學

180.

陳宗漢,蔡宗岩,謝坤哲,張士欽,戴念華,陳學禮,“Two-dimensional metallic nanobowl array transferred onto thermoplastic substrates by microwave heating of carbon nanotubes” 中國材料科學學會, 2008年材料年會,97年11月21-22日,台北科技大學(優等獎)

181.

Shih-Hao Tseng and Nyan-Hwa Tai, “Effects of Fe2SiO4 cluster formation on the electric properties of single walled carbon nanotubes during camera flash” 2008 MRS Fall Meeting, December 1-5, 2008, Boston, USA

182.

Tsung-Yen Tsai, Shih-Hao Tseng, Nyan-Hwa Tai, and Meng-Kao Yeh, “Synthesis of Carbon Nanotubes and Its Applications in Flexible Field Emission Device and Composites”, ICCM-17, Edinburgh, England, July 22-27 (2009)

183.

Nyan-Hwa Tai, Chih-Kuang Sun, Yin-Ju Chen, Ming-Chuen Yip, Chi-Yuan Huang, “Investigation on the Electromagnetic Interference Shielding Efficiency of CNTs/nanocomposites”, nt09, Beijing, China, June 22-26 (2009)

184.

Hsin Mao Chen, Jia-Rong Liang, Yin Ju Chen, Nyan-Hwa Tai, “Application of the Taguchi analytical method to optimize the growth parameters of single-walled carbon nanotubes in a vertically floating catalyst system”, nt09, Beijing, China, June 22-26 (2009)

185.

Shih-Hao Tseng, Nyan-Hwa Tai, Tsung-Yen Tsai, and Yu-An Li, “Field emission properties of the vertically aligned carbon nanotubes synthesized through the cold-walled chemical vapor deposition process using secondary heating elements“, nt09, Beijing, China, June 22-26 (2009)

186.

Ying-Chieh Chen, Hung-Chi Wu, Huang-Chin Chen, Keng-Fu Liu, Chi-Young Lee, I-Nan Lin, Nyan-Hwa Tai, “Enhancement of field emission properties for silicon nanowires via the coating of nitrogen-doped ultrananocrystalline diamond, NDNC, Traverse City MI, (2009)

187.

Huang-Chin Chen, Keng-Fu Liu, Nyan-Hua Tai and I-Nan Lin,”On the mechanism of enhancing the nucleation behavior of UNCD films by Mo-coating : the TEM study, NDNC, Traverse City MI, (2009)

E. Others:

1. 葉孟考,戴念華,陳伯毅,「原子力顯微鏡探針懸臂樑彈簧常數校準」,主編: 楊鏡堂,葉孟考,奈米科技實驗手冊教育部中北區奈米科技K-12教育發展中心系列叢書,2007/12
2. 葉孟考,戴念華,彭泰豪,「奈米探管之幾何形貌觀察」,主編: 楊鏡堂,葉孟考,奈米科技實驗手冊教育部中北區奈米科技K-12教育發展中心系列叢書,2007/12